[RAS] nebka down

[Christian Zimmermann]

OK, tried again a few reboots. I get it now to work somewhat by not 
physically moving the drives but playing only with the RAID controller, 
and in boot/grub/menu.lst leaving root at sda1.

Now it boots from the big drive, but hangs on a missing /proc.

df shows:
/dev/sda1 /
tmpfs /lib/init/rw
udev /dev

and that's it.

How do I fix that? do I need to rsync /proc from the old disk as well?
And /sys?

Christian Zimmermann                                     FIGUGEGL!
Department of Economics
University of Connecticut
341 Mansfield Road, Unit 1063
Storrs, CT 06269-1063
http://ideas.repec.org/zimm/   christian.zimmermann at uconn.edu
http://ideas.repec.org/e/pzi1.html

On Mon, 24 Mar 2008, Thomas Krichel wrote:

>
>  Christian Zimmermann writes
>
>> The grub-install --recheck gives this:
>>
>> end_request: I/O error, dev fd0, sector 0
>> end_request: I/O error, dev fd0, sector 0
>> end_request: I/O error, dev fd0, sector 0
>> end_request: I/O error, dev fd0, sector 0
>> end_request: I/O error, dev fd0, sector 0
>> end_request: I/O error, dev fd0, sector 0
>> end_request: I/O error, dev fd0, sector 0
>> end_request: I/O error, dev fd0, sector 0
>> end_request: I/O error, dev fd0, sector 0
>> end_request: I/O error, dev fd0, sector 0
>> Installation finished. No erro reported.
>> This is the contents of the device map /vol/boot/grub/device.map
>> (fd0) /dev/fd0
>> (hd0) /dev/sda
>> (hd1) /dev/sdb
>
>  -rechek -root-directory=/vol/boot/ /dev/sdb
>
>  I think
>>
>> Is this what it is supposed to be?
>>
>
>
>  yeah, it just reports it can't read the floppy drive.
>
>
>
>
>  Cheers,
>
>  Thomas Krichel                    http://openlib.org/home/krichel
>                                RePEc:per:1965-06-05:thomas_krichel
>  phone: +7 383 330 6813                       skype: thomaskrichel
>