[cgiapp] [Announce] CGI::Application::Plugin::Routes v1.01 now on
cpan
Porta
julian.porta at gmail.com
Wed Jun 10 17:41:22 EDT 2009
Honestly, I haven't used CAP::Auth so it's hard for me to know how it works.
How does it generate a runmode from the login form?How do you handle that *
without* CAP::Routes?
On Wed, Jun 10, 2009 at 4:11 PM, P Kishor <punk.kish at gmail.com> wrote:
> Hi,
>
> CAP::Routes now installs fine, and seems to work, mostly. I am having
> a bit of difficulty trying to make it work with CAP::Authentication
> and as a replacement for CA::Dispatch .
>
> With CAD and CAP::Authentication, I have the following that works
>
> # in index.cgi
> CGI::Application::Dispatch->dispatch(
> table => [
> welcome => { app => 'App', rm => 'welcome' },
> view => { app => 'App', rm => 'view' },
> ],
> );
>
> # in App.pm
> sub setup {
> my $self = shift;
>
> $self->start_mode("welcome");
> $self->mode_param(param => 'rm');
> $self->run_modes(
> welcome => 'welcome',
> view => 'view',
> );
>
> $self->authen->protected_runmodes('view');
> }
>
> Then I replace the above with the following
> # in index.cgi
> App->new(
> TMPL_PATH => ..,
> PARAMS => {
> ..
> },
> )->run();
>
> # and in App.pm
> sub setup {
> my $self = shift;
>
> $self->routes([
> welcome => 'welcome',
> view => 'view',
> ]);
> $self->start_mode('welcome');
>
> $self->authen->protected_runmodes('view');
> }
>
> But now, I get the error "Error executing run mode 'authen_login':
> Can't locate object method "authen_login" via package "App"...
>
> This 'authen_login' run mode is being generated by the login form from
> CAP::Authentication.
>
> On Thu, Jun 4, 2009 at 7:44 PM, Porta<julian.porta at gmail.com> wrote:
> > Damn typo...
> > Thanks for the advice. Just uploaded the fixed version to cpan... should
> be
> > available sometime tomorrow.
> >
> > I'll take a close look to the cpantesters (I haven't noticed it existence
> > before).
> >
> >
> > On Thu, Jun 4, 2009 at 9:19 PM, P Kishor <punk.kish at gmail.com> wrote:
> >
> >> On Thu, Jun 4, 2009 at 7:12 PM, Porta <julian.porta at gmail.com> wrote:
> >> > Damn....
> >> > thanks for the feedback... will look into it.
> >> >
> >>
> >> Thanks. While you are investigating, note that it fails on just about
> >> every platform. See
> >>
> >> http://www.cpantesters.org/distro/C/CGI-Application-Plugin-Routes.html
> >>
> >>
> >> > On Thu, Jun 4, 2009 at 9:09 PM, P Kishor <punk.kish at gmail.com> wrote:
> >> >
> >> >> On Wed, Jun 3, 2009 at 5:28 PM, Porta <julian.porta at gmail.com>
> wrote:
> >> >> > Hi folks.
> >> >> >
> >> >> > Just in case anyone's interested, CGI::Application::Plugin::Routes
> hit
> >> >> v1.01
> >> >> > and it's available on CPAN
> >> >> >
> >> >>
> >>
> http://search.cpan.org/~porta/CGI-Application-Plugin-Routes-1.01/lib/CGI/Application/Plugin/Routes.pm
> <
> http://search.cpan.org/%7Eporta/CGI-Application-Plugin-Routes-1.01/lib/CGI/Application/Plugin/Routes.pm
> >
> >> <
> >>
> http://search.cpan.org/%7Eporta/CGI-Application-Plugin-Routes-1.01/lib/CGI/Application/Plugin/Routes.pm
> >> >
> >> >>
> >> >> Install failed on my Mac OS X with Perl 5.8.8
> >> >>
> >> >> Writing Makefile for CGI::Application::Plugin::Routes
> >> >> cp lib/CGI/Application/Plugin/Routes.pm
> >> >> blib/lib/CGI/Application/Plugin/Routes.pm
> >> >> Manifying blib/man3/CGI::Application::Plugin::Routes.3
> >> >> PORTA/CGI-Application-Plugin-Routes-1.01.tar.gz
> >> >> /usr/bin/make -- OK
> >> >> Running make test
> >> >> PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e"
> >> >> "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
> >> >> t/00-load.........Calling package is not a CGI::Application module so
> >> >> not setting up the prerun hook. If you are using @ISA instead of
> 'use
> >> >> base', make sure it is in a BEGIN { } block, and make sure these
> >> >> statements appear before the plugin is loaded at
> >> >>
> >> >>
> >>
> /Users/punkish/.cpan/build/CGI-Application-Plugin-Routes-1.01-frSwPF/blib/lib/CGI/Application/Plugin/Routes.pm
> >> >> line 25.
> >> >> # Testing CGI::Application::Plugin::Routes 1.01, Perl 5.008008,
> >> >> /usr/local/bin/perl
> >> >> t/00-load.........ok
> >> >> t/basic...........Error executing class callback in prerun stage:
> >> >> Can't locate object method "route_params" via package "TestApp" at
> >> >>
> >> >>
> >>
> /Users/punkish/.cpan/build/CGI-Application-Plugin-Routes-1.01-frSwPF/blib/lib/CGI/Application/Plugin/Routes.pm
> >> >> line 104.
> >> >> # Looks like your test exited with 2 before it could output anything.
> >> >> t/basic...........dubious
> >> >> Test returned status 2 (wstat 512, 0x200)
> >> >> t/boilerplate.....ok
> >> >> 2/3 unexpectedly succeeded
> >> >> TODO PASSED tests 2-3
> >> >>
> >> >> t/pod-coverage....
> >> >> # Failed test 'Pod coverage on CGI::Application::Plugin::Routes'
> >> >> # at /usr/local/lib/perl5/site_perl/5.8.8/Test/Pod/Coverage.pm line
> >> 126.
> >> >> # Coverage for CGI::Application::Plugin::Routes is 80.0%, with 1
> naked
> >> >> subroutine:
> >> >> # routes_params
> >> >> t/pod-coverage....NOK 1/1# Looks like you failed 1 test of 1.
> >> >> t/pod-coverage....dubious
> >> >> Test returned status 1 (wstat 256, 0x100)
> >> >> DIED. FAILED test 1
> >> >> Failed 1/1 tests, 0.00% okay
> >> >> t/pod.............ok
> >> >> Failed Test Stat Wstat Total Fail List of Failed
> >> >>
> >> >>
> >>
> -------------------------------------------------------------------------------
> >> >> t/basic.t 2 512 ?? ?? ??
> >> >> t/pod-coverage.t 1 256 1 1 1
> >> >> (2 subtests UNEXPECTEDLY SUCCEEDED).
> >> >> Failed 2/5 test scripts. 1/6 subtests failed.
> >> >> Files=5, Tests=6, 1 wallclock secs ( 0.19 cusr + 0.06 csys = 0.25
> >> CPU)
> >> >> Failed 2/5 test programs. 1/6 subtests failed.
> >> >> make: *** [test_dynamic] Error 255
> >> >> PORTA/CGI-Application-Plugin-Routes-1.01.tar.gz
> >> >> /usr/bin/make test -- NOT OK
> >> >> //hint// to see the cpan-testers results for installing this module,
> >> try:
> >> >> reports PORTA/CGI-Application-Plugin-Routes-1.01.tar.gz
> >> >> Running make install
> >> >> make test had returned bad status, won't install without force
> >> >> Failed during this command:
> >> >> PORTA/CGI-Application-Plugin-Routes-1.01.tar.gz: make_test NO
> >> >>
> >> >>
> >> >>
> >> >> >
> >> >> > Enjoy.
> >> >> >
> >> >> >
> >> >> > Porta.
> >> >> >
>
> ##### CGI::Application community mailing list ################
> ## ##
> ## To unsubscribe, or change your message delivery options, ##
> ## visit: http://lists.openlib.org/mailman/listinfo/cgiapp ##
> ## ##
> ## Web archive: http://lists.openlib.org/pipermail/cgiapp/ ##
> ## Wiki: http://cgiapp.erlbaum.net/ ##
> ## ##
> ################################################################
>
>
More information about the cgiapp
mailing list